Instrument drying cabinet is a purpose-built medical device used in sterile processing and reprocessing areas to remove residual moisture from cleaned medical instruments and accessories using controlled airflow (often warmed and filtered). Drying is not a cosmetic step: retained water can contribute to corrosion, spotting, packaging issues, and inconsistent downstream sterilization or storage outcomes.

Ultrasonic cleaner is a piece of hospital equipment used to support the cleaning stage of reusable medical device reprocessing. It applies high-frequency sound waves in a liquid bath to create microscopic cleaning action (cavitation) that helps loosen soils from hard-to-reach surfaces, joints, serrations, and small crevices.

Washer disinfector is automated hospital equipment designed to clean and thermally disinfect reusable medical devices and accessories (such as surgical instruments, trays, and certain anesthesia items) in a controlled, repeatable cycle. It sits at the heart of modern sterile processing because effective cleaning is a prerequisite for reliable disinfection and sterilization outcomes.

Ethylene oxide EtO sterilizer is a low-temperature sterilization system used to sterilize heat- and moisture-sensitive medical device loads that cannot tolerate steam or high heat. In many hospitals, it supports sterile processing workflows for complex, delicate, or electronic medical equipment where other methods may be incompatible.

Low temperature sterilizer H2O2 plasma is hospital equipment designed to sterilize compatible medical devices at relatively low temperatures using hydrogen peroxide (H2O2) vapor and a plasma phase inside a sealed chamber. It is widely used when steam sterilization is not suitable—particularly for heat- and moisture-sensitive medical equipment that still requires a validated sterilization process.

Steam sterilizer autoclave is essential hospital equipment for reprocessing many reusable medical devices and instrument sets that can tolerate heat and moisture. By using saturated steam under controlled pressure, temperature, and time, it supports reliable sterilization processes that reduce the risk of transmitting microorganisms between patients and healthcare staff.

Prosthetic limb lower is a category of medical device designed to replace part or all of a missing lower limb, supporting standing, transfers, and walking after limb loss. In hospitals and rehabilitation services, it sits at the intersection of surgical pathways, wound management, physiotherapy, occupational therapy, and long-term mobility planning—often with significant implications for falls risk, length of rehabilitation, discharge readiness, and follow-up workload.

Shoulder sling is a widely used orthopedic support medical device designed to help support the upper limb and limit shoulder and arm movement when clinically indicated. In hospitals, ambulatory clinics, emergency departments, and rehabilitation services, it is common hospital equipment because it is simple, relatively low-cost, and frequently needed across trauma, orthopedics, neurology, and post-operative care pathways.

Knee brace hinged is a category of external orthotic support designed to stabilize the knee joint using one or more mechanical hinges. In hospitals and clinics, this medical device is commonly used to limit or guide knee motion, improve joint stability, and support rehabilitation pathways—often as an alternative or complement to splints, wraps, or casting.

Ankle foot orthosis AFO is a lower-limb orthotic medical device designed to support, align, protect, and assist the ankle and foot during standing and walking. In day-to-day hospital and clinic operations, it is commonly used to help manage gait impairments (such as reduced toe clearance), stabilize weak or unstable joints, and reduce functional limitations that can increase fall risk and length of stay.

Standing frame is a rehabilitation and positioning **medical device** designed to support a person in a standing posture when they cannot stand safely or independently. In hospitals, clinics, long-term care, and community rehabilitation settings, it is used to enable supported upright positioning for therapy activities, functional participation, and structured mobility programs—while reducing avoidable risk to patients and staff.

Balance trainer board is a simple but high-impact piece of rehabilitation-focused medical equipment used to challenge and develop balance, postural control, and lower-limb coordination. In hospitals and clinics, it commonly supports physiotherapy and occupational therapy programs for patients with mobility limitations, deconditioning, or neuromuscular impairment—always under appropriate supervision and according to facility policy.

Continuous passive motion CPM machine is a powered rehabilitation medical device designed to move a patient’s joint through a controlled range of motion without active muscle effort. In hospitals and outpatient settings, it is most commonly associated with post-operative orthopedic pathways (especially knee care), but it can also appear in broader rehabilitation programs where passive, repeatable motion is part of a clinician-led plan.

Traction table is a specialized piece of hospital equipment designed to apply and maintain controlled traction (a steady pulling force) and positioning to a patient—most commonly to a lower limb—while supporting procedural access, imaging, and safe workflow. In many operating rooms it is closely associated with orthopedic trauma and hip procedures, where stable traction and repeatable alignment can improve access and reduce the need for continuous manual holding by staff.

Cold therapy unit is a commonly used piece of hospital equipment designed to deliver controlled cooling to a localized area of the body. In many facilities it supports perioperative pathways, orthopedic recovery, sports medicine, and rehabilitation programs where cooling is used as part of broader pain and swelling management protocols.

Hot pack hydrocollator is a common piece of rehabilitation and physiotherapy **hospital equipment** designed to heat and store reusable moist hot packs at a controlled temperature so they are ready for clinical use throughout the day. You will see it in outpatient therapy gyms, inpatient rehab units, sports medicine clinics, and anywhere superficial heat therapy is part of a standardized care pathway.

Ultrasound therapy unit is a non-invasive clinical device designed to deliver controlled ultrasonic energy into tissue, most commonly as part of physiotherapy and rehabilitation services. It is **not** the same as diagnostic ultrasound imaging: instead of producing pictures, it delivers energy intended to create thermal and/or non-thermal biological effects under clinician-selected parameters.

Neuromuscular electrical stimulation NMES unit is a therapeutic medical device that delivers controlled electrical pulses through skin electrodes to stimulate peripheral motor nerves and produce muscle contractions. In hospitals and clinics, this form of electrotherapy is used as an adjunct to rehabilitation, mobility programs, and muscle re-education—particularly when a patient cannot generate effective voluntary contraction due to pain, weakness, immobilization, or neurologic impairment.

A Transcutaneous electrical nerve stimulation TENS unit is a portable clinical device that delivers low-voltage electrical pulses through surface electrodes placed on the skin. It is used as a non-invasive modality to support pain management and functional rehabilitation across inpatient, outpatient, and community care pathways.

A Dynamometer handgrip is a measuring medical device used to quantify grip strength—typically as a force value—during a standardized squeeze. In hospitals, outpatient clinics, rehabilitation centers, and occupational health programs, this simple-looking clinical device can support consistent functional assessment, track progress over time, and help teams communicate objective findings using a shared metric.