Shoulder sling is a widely used orthopedic support medical device designed to help support the upper limb and limit shoulder and arm movement when clinically indicated. In hospitals, ambulatory clinics, emergency departments, and rehabilitation services, it is common hospital equipment because it is simple, relatively low-cost, and frequently needed across trauma, orthopedics, neurology, and post-operative care pathways.
Knee brace hinged is a category of external orthotic support designed to stabilize the knee joint using one or more mechanical hinges. In hospitals and clinics, this medical device is commonly used to limit or guide knee motion, improve joint stability, and support rehabilitation pathways—often as an alternative or complement to splints, wraps, or casting.
Ankle foot orthosis AFO is a lower-limb orthotic medical device designed to support, align, protect, and assist the ankle and foot during standing and walking. In day-to-day hospital and clinic operations, it is commonly used to help manage gait impairments (such as reduced toe clearance), stabilize weak or unstable joints, and reduce functional limitations that can increase fall risk and length of stay.
Standing frame is a rehabilitation and positioning **medical device** designed to support a person in a standing posture when they cannot stand safely or independently. In hospitals, clinics, long-term care, and community rehabilitation settings, it is used to enable supported upright positioning for therapy activities, functional participation, and structured mobility programs—while reducing avoidable risk to patients and staff.
Balance trainer board is a simple but high-impact piece of rehabilitation-focused medical equipment used to challenge and develop balance, postural control, and lower-limb coordination. In hospitals and clinics, it commonly supports physiotherapy and occupational therapy programs for patients with mobility limitations, deconditioning, or neuromuscular impairment—always under appropriate supervision and according to facility policy.
Continuous passive motion CPM machine is a powered rehabilitation medical device designed to move a patient’s joint through a controlled range of motion without active muscle effort. In hospitals and outpatient settings, it is most commonly associated with post-operative orthopedic pathways (especially knee care), but it can also appear in broader rehabilitation programs where passive, repeatable motion is part of a clinician-led plan.
Traction table is a specialized piece of hospital equipment designed to apply and maintain controlled traction (a steady pulling force) and positioning to a patient—most commonly to a lower limb—while supporting procedural access, imaging, and safe workflow. In many operating rooms it is closely associated with orthopedic trauma and hip procedures, where stable traction and repeatable alignment can improve access and reduce the need for continuous manual holding by staff.
Cold therapy unit is a commonly used piece of hospital equipment designed to deliver controlled cooling to a localized area of the body. In many facilities it supports perioperative pathways, orthopedic recovery, sports medicine, and rehabilitation programs where cooling is used as part of broader pain and swelling management protocols.
Hot pack hydrocollator is a common piece of rehabilitation and physiotherapy **hospital equipment** designed to heat and store reusable moist hot packs at a controlled temperature so they are ready for clinical use throughout the day. You will see it in outpatient therapy gyms, inpatient rehab units, sports medicine clinics, and anywhere superficial heat therapy is part of a standardized care pathway.
Ultrasound therapy unit is a non-invasive clinical device designed to deliver controlled ultrasonic energy into tissue, most commonly as part of physiotherapy and rehabilitation services. It is **not** the same as diagnostic ultrasound imaging: instead of producing pictures, it delivers energy intended to create thermal and/or non-thermal biological effects under clinician-selected parameters.
Neuromuscular electrical stimulation NMES unit is a therapeutic medical device that delivers controlled electrical pulses through skin electrodes to stimulate peripheral motor nerves and produce muscle contractions. In hospitals and clinics, this form of electrotherapy is used as an adjunct to rehabilitation, mobility programs, and muscle re-education—particularly when a patient cannot generate effective voluntary contraction due to pain, weakness, immobilization, or neurologic impairment.
A Transcutaneous electrical nerve stimulation TENS unit is a portable clinical device that delivers low-voltage electrical pulses through surface electrodes placed on the skin. It is used as a non-invasive modality to support pain management and functional rehabilitation across inpatient, outpatient, and community care pathways.
A Dynamometer handgrip is a measuring medical device used to quantify grip strength—typically as a force value—during a standardized squeeze. In hospitals, outpatient clinics, rehabilitation centers, and occupational health programs, this simple-looking clinical device can support consistent functional assessment, track progress over time, and help teams communicate objective findings using a shared metric.
Goniometer is a widely used clinical device for measuring angles—most commonly to quantify joint range of motion (ROM) in rehabilitation, orthopedics, and therapy services. While it is often viewed as simple hospital equipment, consistent and well-governed use can materially improve documentation quality, interdisciplinary communication, outcomes tracking, and the comparability of functional assessments across sites and clinicians.
A Therapy mat table is a padded, supportive platform used in rehabilitation and therapy environments to enable safe patient positioning, transfers, manual techniques, and therapeutic exercise. In many facilities it functions as “core infrastructure” for physiotherapy, occupational therapy, and multidisciplinary rehab—similar in importance to exam tables in outpatient care or beds in inpatient units.
Upper body ergometer is a piece of medical equipment designed for controlled, repeatable upper-limb exercise by “arm cranking” against an adjustable resistance. In hospitals and clinics, it is commonly used in rehabilitation, cardiopulmonary conditioning, and (in some settings) exercise testing when lower-limb exercise is limited or not appropriate.
Stationary bike rehab is a category of stationary cycling systems used in rehabilitation settings to deliver controlled, repeatable exercise for patients across a wide range of functional levels. Depending on configuration, it may be a simple non-powered cycle, a calibrated ergometer that reports workload, or a motor-assisted device that can support passive or assisted cycling. In many facilities it sits at the intersection of therapy, early mobilization, and measurable functional conditioning.
Treadmill rehab is a category of clinical treadmill systems used to support supervised rehabilitation and gait training in hospitals, outpatient clinics, and specialty rehab centers. Unlike consumer fitness treadmills, these systems are typically selected and configured for safety, repeatability, and workflow in clinical environments—often with options such as extended handrails, low starting speeds, body-weight support compatibility, and interfaces designed for clinicians.
An **Intraoral scanner** is a handheld optical **medical device** used to capture a digital 3D surface model of teeth and surrounding oral tissues. Instead of relying only on conventional impression materials, clinicians can create a “digital impression” that is immediately viewable, measurable, and transferable for downstream workflows such as restorative design, orthodontic planning, and documentation.
An Impression tray is a simple but high-impact medical device used to carry impression material into the mouth to capture a negative replica of teeth, gingiva, and surrounding oral structures. That replica becomes the foundation for dental models and restorations—supporting everything from diagnostic casts and orthodontic appliances to crowns, bridges, dentures, and maxillofacial prosthetics.